| Intake Work (Services) | Prices: | |
| Machine Faces Up to .020" | $100.00 | |
| Measure and angle Mill to Proper Fit Engine | $150.00 | |
| Machine End Rails | $75.00 | |
| Match Port to Heads | $160.00 | |
| Blend Plenum | $100.00 | |
| Glass Bead Intake | $40.00 | |
| Sonic clean Intake | $20.00 | |
| Weld Up Heat Cross Over Passage | $85.00 | |
| Weld Up/Repair Cracks and Damage | $80.00 (hr) | |
| Balancing (Services) | ||
| Balance (Internal) Heavy Metal is Extra | $275.00 | |
| Balance (External) Heavy Metal is Extra | $295.00 | |
| Balance Assembly (w/flex plate and balancer) | $225.00 | |
| Balance Pistons | $55.00 | |
| Balance Rods | $80.00 | |
| Balance Flywheel to Neutral | $75.00 | |
| Balance Flywheel to Weight other than 0 | $100.00 | |
| Install Heavy Metal (labor only) 1st Slug | $125.00 | |
| Install Heavy Metal (labor only) 2nd Slug | $90.00 | |
 |
 |
|
 |
 |
|
 |
||
